There are a million ascending systems out there. On this blog we have previously discussed jugging with mechanical ascenders, the prusik hitch and climbing the rope with an autoblocking device. These are all excellent techniques for climbing up a rope...but it doesn't mean that they're the only techniques.
Climbers are ultimately artists and part of the art of climbing is picking the right tool at the right time to get up or down something. As a result, the more things that you know, the more tools that you have in your toolbox. And the more things that you know, the more improvisational you can be in any type of climbing situation.
This blog will provide you with another option for climbing up a rope. To set-up this system, you will need a mechanical ascender, a GriGri and a double-shoulder length sling. The following photo shows how each of these components will be used.
Following are the steps that you will need to complete in order to make this system work:
- Clip the mechanical ascender to the rope.
- Clip a double-shoulder length sling to the base of the ascender. This will become your be for your foot.
- Clip a carabiner to the top of the ascender, trapping the rope inside the ascender.
- Run the rope through your GriGri below the ascender.
- Redirect the rope from the break-hand of the GriGri up through the clip that is trapping the ascender on the rope.
One important thing to always remember is that you will need to tie back-up "catastrophe knots" in the rope as you climb. This should happen every ten feet or so. One should never forget to do this, as occasionally GriGris slip.
Obviously, the only way to really dial in this system is to practice it. The best way to work through this system is to print this blog out, bring it out into the field and then make it happen!
--Jason D. Martin
